Ilmainen toimitus kaikille tilauksille.

sulje OSTOSKORI

Korissasi ei ole tuotteita

Yhteensä:

DEEP TURTLE

SUUM400 DEEP TURTLE
80,00 €
-
+

tuote lisätty ostoskoriin

1 product
fonctions_icons-expidition_express

ILMAINEN TOIMITUS

fonctions_icons-paiement_en_ligne

SUOJATTU VERKKOMAKSU

fonctions_icons-free_gift

ILMAINEN LAHJA / VIESTI KASSALLA

fonctions_icons-satisfait_ou_rembourse

TYYTYVÄISYYSTAKUU

DEEP TURTLE image 0 DEEP TURTLE image 1 DEEP TURTLE image 2

Tiedot

Malliston vuosi 2013 Summer
Collection Category Scubalibre
Koneisto Kvartsi
Pakkaustyyppi Vakiopakkaus
Vesitiiviys (metriä) 20 bar
Väri Musta
Rannekkeet väri Musta
Rannekkeet materiaali Tekstiili
Rannekkeet soljen materiaali Muovi
Rannekkeet solki Solki
Kellotaulun väri Musta
Kuoren väri Harmaa
Kuoren muoto Pyöreä
Kuoren materiaali Muovi
Kuoren koko Large
Takuu 2 vuoden takuu
Kuorin
Ø 44.00 mm
P : 16.65 mm
K : 49.00 mm
User Manuals
  • Add Function
    Add Function
  • Add Function

    Add Function

    Press…

    1. The upper push-button to start.

    2. Press the upper push-button to read the first time.

    3. Press the upper push-button to restart the chronograph.

    4. Press the upper push-button to read the additional time (repeat these two steps as many time as you wish).

    5. Press the lower push-button to reset.

    Add Function

    Press…

    1. The upper push-button to start.

    2. Press the upper push-button to read the first time.

    3. Press the upper push-button to restart the chronograph.

    4. Press the upper push-button to read the additional time (repeat these two steps as many time as you wish).

    5. Press the lower push-button to reset.

  • Battery Change
    Battery Change
  • Battery Change

    Battery Change

    Important:

    When replacing the battery, be careful not to damage the (+) terminal which is on the side. The (-) terminal is at the bottom.

    Battery Change

    Important:

    When replacing the battery, be careful not to damage the (+) terminal which is on the side. The (-) terminal is at the bottom.

  • Measuring time
    Measuring time
  • Measuring time

    Measuring time

    Using the adjustment ring

    For setting the start time and duration of an activity. Line up the marker on the adjustment ring with the minute hand. Timing starts at the time indicated by the marker. The elapsed time is indicated by the minute hand pointing the number on the adjustement ring.

    IMPORTANT: After being submerged in salt water, the Scuba 200 Chrono should always be rinsed with fresh water.

    CAUTION: The Irony Scuba 200 Chrono is not a professional diving watch.

    Measuring time

    Using the adjustment ring

    For setting the start time and duration of an activity. Line up the marker on the adjustment ring with the minute hand. Timing starts at the time indicated by the marker. The elapsed time is indicated by the minute hand pointing the number on the adjustement ring.

    IMPORTANT: After being submerged in salt water, the Scuba 200 Chrono should always be rinsed with fresh water.

    CAUTION: The Irony Scuba 200 Chrono is not a professional diving watch.

  • Readjustment
    Readjustment
  • Readjustment

    Readjustment

    Adjusting the chronograph (e.g.: after battery change or a hard shock)

    1. Pull the crown to position B.

    2. Press the upper button to reach the position 12h00 with the hand of the 1/10 sec. counter.

    3. Pull the lower button to reach the position 12h00 with the hand of the seconds.

    4. Pull the crown to the position C.

    5. Press the upper button to reach the position 12h00 with the hand of the minutes counters.

    6. Press the crown to position A.

    Readjustment

    Adjusting the chronograph (e.g.: after battery change or a hard shock)

    1. Pull the crown to position B.

    2. Press the upper button to reach the position 12h00 with the hand of the 1/10 sec. counter.

    3. Pull the lower button to reach the position 12h00 with the hand of the seconds.

    4. Pull the crown to the position C.

    5. Press the upper button to reach the position 12h00 with the hand of the minutes counters.

    6. Press the crown to position A.

  • Set the Date
    Set the Date
  • Set the Date

    Set the Date

    To set the date, pull the crown out to position B, and turn anticlockwise. To set the day, turn the crown in a clockwise direction. After resetting has been completed, press the crown back to position A.

    Set the Date

    To set the date, pull the crown out to position B, and turn anticlockwise. To set the day, turn the crown in a clockwise direction. After resetting has been completed, press the crown back to position A.

  • Set the Time
    Set the Time
  • Set the Time

    Set the Time

    A: Normal position of the crown

    C: Position for setting the time

    To set the time, pull the crown out to position C and turn clockwise or anticlockwise. After resetting has been completed, press the crown back to position A.

    Set the Time

    A: Normal position of the crown

    C: Position for setting the time

    To set the time, pull the crown out to position C and turn clockwise or anticlockwise. After resetting has been completed, press the crown back to position A.

  • Split Time
    Split Time
  • Split Time

    Split Time

    Press…

    1. The upper push-button to start the chronograph.

    2. The lower push-button to read the intermediary time.

    3. Once again to continue (repeat the last two actions as many times as you wish to read the intermediary time while the chrono carries on).

    4. The upper push-button to stop finally.

    5. The lower push-button to reset.

    Split Time

    Press…

    1. The upper push-button to start the chronograph.

    2. The lower push-button to read the intermediary time.

    3. Once again to continue (repeat the last two actions as many times as you wish to read the intermediary time while the chrono carries on).

    4. The upper push-button to stop finally.

    5. The lower push-button to reset.

  • Tachymeter
    Tachymeter
  • Tachymeter

    Tachymeter

    Measure the speed Base 100 or 1000 m.

    Press...

    1. The upper push-button when an action starts.

    2. Once again to stop after a distance of 100 or 1000 m. Read the speed indicated by the 60 seconds counter (Retrograde: 30 sec.) on the tachymeter scale (km/h = kph).

    3. The lower push-button to reset.

    Tachymeter

    Measure the speed Base 100 or 1000 m.

    Press...

    1. The upper push-button when an action starts.

    2. Once again to stop after a distance of 100 or 1000 m. Read the speed indicated by the 60 seconds counter (Retrograde: 30 sec.) on the tachymeter scale (km/h = kph).

    3. The lower push-button to reset.

  • Timing Mode
    Timing Mode
  • Timing Mode

    Timing Mode

    Press…

    1. The upper push-button to start the chronograph.

    2. Once again to read the elapsed time.

    3. The lower push-button to reset.

    Timing Mode

    Press…

    1. The upper push-button to start the chronograph.

    2. Once again to read the elapsed time.

    3. The lower push-button to reset.